5 steps and some safety measures for mending your rooftops

Working on a concrete roof renovation is no child’s play. Apart from keeping safety measure in mind, you must also be aware of many other fine details about the same. Only when you are absolutely sure about carrying on the task on your own without hiring roofing specialists, go ahead with it. Here is a brief to-do list, which will help you in your endeavor. Let’s go through them to have a better idea:

Safety comes first: Before anything else, you must make sure that it is absolutely safe to work on your rooftop. Here are some safety tips which you can use.

• Choose a sunny day for repairing work as a rainy day make the roofs slippery and perilous.

• Use safety ropes and harness for your work

• Always wear rubber-sole shoes with best grip and traction

• Keep in mind the power lines or branches of trees that are in contact with the roof

• Get the roof checked for leaks and other repairs by roofing specialists so that you have a plan ready

Things to do:

• Check for leaks and cracks: The first thing is to check whether your roof has any leaks and cracks. Even if a few of the tiles have these defects, you must curb them in time. This is because these conditions will aggravate if not tended to at the earliest. When you have detected these or any other repairs that is required, proceed to the next step, which is cleaning the rooftop.

• Clean the debris: If cleaning the roof is your main aim, then you need not hire the services of a firm that oversees roof cleaning in Melbourne. All you need to do is invest in a good quality wire brush and remove dirt that has accumulated on your rooftop over the time. You will also need to use a handheld broom to clean away rotting leaves, dry twigs and dust.

•  Wash the roof surface: One of the best things about a concrete roof is that it is easy to wash without much hassle. This works to your advantage as you can wash the roof tiling simply with your regular sponge and warm water. When it is completely dry, continue to the next step.

• Fill in the cracks: When the roof surface is prepared by cleaning and washing, the next step is to fill in the cracks and leaks in your concrete roof tiles. For this purpose, there are numerous products available on the market. One of the common products is roofing cement and a caulking gun. You have to fit the tubes of roofing cement into the gun and use it to fill the cracks or leaks to perfection. However, make sure that you don’t overfill them.

• Smoothening: The final step is to smoothen the roofing cement. For this, you will require metal edged putty knife. Done perfectly, the result will be same as any concrete tile.

In Conclusion

These are some basic steps of repairing a concrete rooftop. If you can carry the work to perfection, there will be no need for either going to a firm that offers services for roof replacement or roof cleaning in Melbourne. Good luck!